+1 860 944 7786
Catalog from
Multiparameter Portable Tester LZ-WQT-A100
Catalog Original image

Multiparameter Portable Tester LZ-WQT-A100 |


Multiparameter Portable Tester LZ-WQT-A100 ease of use, reliable, economical tester, all in one instrument for measuring pH, ORP, Ion, Conductivity, Resistivity, Salinity, TDS, DO that fulfills with the most inflexible operating requirement. Suitable for testing all kinds of water utilization and ideal choice for increasing focus on water quality monitoring.

Specifications :
Type Portable 
Display  Digital
Range -2.00 to 20.00 pH 
Accuracy ±0.002 pH 
Calibration Point 1 to 5 ponit
Calibration Solution USA, NIST,DIN 
Range -1999.9 to1999.9 mV
Accuracy ±0.2 mV
Calibration Point 1 Point
Calibration Solution mV & Relative mV
Range 0 to 19999 ppm, mg/l, mol/l, (depending on range of ISE)
Accuracy ±0.5% F.S (Monovalent) ±1% F.S(Divalent)
Calibration Point 2 to 5 point
Calibration Solution 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol/l, mg/l
Range 0 to 20, 200, 2000 µS/cm, 20, 200 mS/cm
Accuracy ±0.5% F.S 
Calibration Point 1 to 5 point 
Calibration Solution  10, 84, 1413, µS/cm, 12.88, 111.8 mS/cm
Temperature Coefficient 0 to 10%°C
Compensation Mode Linear or Pure Water
Range 0 to 100 MΩ 
Resolution 0.01, 0.1. 1 
Accuracy ±1% F.S 
Range 0 to 100 ppt(Max 200 ppt) 
Accuracy ±1% F.S  
TDS Factor 0.1 to 1.0 
Range  ±1% F.S  
Accuracy Sea water/Practical Salinity 
Measurement Mode
Concentration Range 0 to 20.00 mg/l
Accuracy  ±0.2 mg/l 
Calibration Point 1 to 2 point 
%Saturation of Oxygen 0 to 200% 
Range 0 to 105°C
Resolution 0.1°C
Accuracy 0.5 °C
Offset Calibration 1 Point
Storage  500 Data Set
Dimension 185x88x32 mm 
Packing Dimension  475x155x350 mm
Net Weight  0.3 kg
Gross Weight 2 kg 
Features :
  • Automatic temperature compensation with measurement mode: pH, ORP, Ion, Conductivity, Resistivity, Salinity, TDS, DO
  • Design with large real-time clock stamp and display, support GLP, & USB interface and can store up to 500 data sets
  • Allow auto-hold function freeze to ensure accurate reading, an automatic electrode for zero point offset, and electrode slope display
  • Available to measure up to 15 parameters and automatic reset features
  • This handy and dynamic unit is suitable to calibrate from 1 to 5 points with push-button and auto-buffer recognition features (pH Mode)
  • Offer customs calibrations solution with USA, NIST, DIN standard pH buffer solution
  • Inbuilt with an automatic electrode slope display
  • Allow single point offset calibration (ORP Mode)
  • Offer adjustable display value for accurate reading
  • Come with dual measurement unit: mV & Relative mV
  • Allow 1 to 5 points calibration (with 8 calibration points) (Ion Concentration Mode)
  • Automatic and direction concentration readout for precise measurement
  • Available units are: ppm, mg/l, mol/l, mmol/l
  • Allow 1 or 2 points calibration under air-saturated water and no oxygen solution (DO Mode)
  • Allow salinity & barometric pressure compensation
  • Automation calibration holding ranges from 1 to 5 points (Salinity/Resistivity/Conductivity Mode)
  • Suitable for linear or pure water compensation
Applications :

Quality testing
Testing different factors in R & D

Accessories :

Temperature probe
Calibration solution
Carrying Case
Electrode: pH, Conductivity, and DO

Catalog Footer logo

2023 © All Rights Reserved by