Tap density Tester LZ-TDT-A201 is a density measurement equipment used to measure the tapped density of powders by standardized or repeatable procedures. Designed with a cylinder volume of ≤ 250 ml, offers frequency ranges of 300 rpm. The instrument uses the latest microprocessor controller system and advanced technology to give enhanced accuracy and reproducibility. The outer surface is plastic-coated, strong, and resistant to any powders. This makes the cleaning procedure easy as well as gives a longer shelf life. Provision has also been made for the attachment of a micro printer to provide printouts of test data, including sample, weight, volume, tap number, tap density, and operator.
| Number of Stations | 2 |
| Cylinder Volume | ≤ 250 ml |
| Sample Weight | ≤ 500 g |
| Number of Tap counts | 0 to 99999(set 0 to output bulk density) |
| Drop Height | 3 mm |
| Motor Force | 0.86 N.m |
| Frequency | 300 rpm (adjustable) |
| Amplitude | 15 mm (Adjustable 1-15 mm) |
| Display | LED Display |
| Repeatability | ≤1% |
| Accuracy | ≤1% |
| Power Supply | 220V |
| Dimension | 330 × 265 × 165 mm |
| Weight | 14.5 kg |
| Accessory No. | Name | Details | Qty. |
| 1 | Measuring Cup | 25 ml | 1 each |
| 2 | Measuring Cup | 50 ml | 1 each |
| 3 | Measuring Cup | 100 ml | 2 each |
| 4 | Measuring Cup | 250ml | 1 each |
| 5 | Gasket | Polyurethane | 4 each |
| 6 | Anti-vibration pad | Stainless steel- 1mm, 2mm, 5mm | 2 each |
| 7 | Power Cable | 250 V, 10 A | 1 each |
| 8 | Fuse | 5×20 mm,1 A | 5 each |
| 9 | Wrench | 10 mm | 1 each |
| 10 | Silicone Gasket | 70x2 mm | 1 each |
Tap Density Tester is an ideal tester to determine the bulk density ceramics, powder coating, metal powder, food, chemical, building materials, paints etc.
2026 © All Rights Reserved by Labozon.com
