Multiparameter Benchtop Tester LZ-WQT-B100

Multiparameter Benchtop Tester LZ-WQT-B100 compact, reliable, and easy to use multiparameter water quality tester. The unit features comply with controlled and systematic digital display for measuring different water quality parameter including pH, ORP, Ion, Conductivity, Resistivity, Salinity, TDS, Dissolved oxygen meter. It features a ranges of features automatic temperature compensation, real-time clock stamp, and customs calibrations solution with USA, NIST, DIN standard pH buffer solution.

Specifications Features Applications Accessories Catalog Enquiry

Specifications

Type

Benchtop

Display

Digital

Range	-2.00 to 20.00 pH
Accuracy	±0.002 pH
Calibration Point	1 to 5 ponit
Calibration Solution	USA, NIST,DIN

ORP

Range	-1999.9 to1999.9 mV
Accuracy	±0.2 mV
Calibration Point	1 Point
Calibration Solution	mV & Relative mV

ION

Range	0 to 19999 ppm, mg/l, mol/l, (depending on range of ISE)
Accuracy	±0.5% F.S (Monovalent) ±1% F.S(Divalent)
Calibration Point	2 to 5 point
Calibration Solution	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol/l

Conductivity

Range	0 to 20, 200, 2000 µS/cm, 20, 200 mS/cm
Accuracy	±0.5% F.S
Calibration Point	1 to 5 point
Calibration Solution	10, 84, 1413, µS/cm, 12.88, 111.8 mS/cm
Temperature Coefficient	0 to 10%°C
Compensation Mode	Linear or Pure Water

Resistivity

Range	0 to 100 MΩ
Resolution	0.01, 0.1. 1
Accuracy	±1% F.S

TDS

Range	0 to 10 ppt(Max 00 ppt)
Accuracy	±1% F.S
TDS Factor	0.1 to 1.0

Salinity

Range	0 to 10 ppt (Maximum-80 ppt)
Accuracy	±1% F.S
Measurement Mode	Sea water/Practical Salinity

Concentration Range	0 to 20.00 mg/l
Accuracy	±0.2 mg/l
Calibration Point	1 to 2 point
%Saturation of Oxygen	0 to 200%

Temperature

Range	0 to 105°C
Resolution	0.1°C
Accuracy	0.5 °C
Offset Calibration	1 Point

Storage

500 Data Set

Power

DC 5V power adaptor

Dimension

210x188x60 mm

Packing Dimension

310x240x180 mm

Net Weight

1.5 kg

Gross Weight

1.7 kg

Features

Automatic temperature compensation with measurement mode: pH, ORP, Ion, Conductivity, Resistivity, Salinity, TDS, DO
Design with large real-time clock stamp and display, support GLP, & USB interface and can store up to 500 data sets
Allow auto-hold function freeze to ensure accurate reading, an automatic electrode for zero point offset, and electrode slope display
Available to measure up to 15 parameters and automatic reset features
This handy and dynamic unit is suitable to calibrate from 1 to 5 points with push-button and auto-buffer recognition features (pH Mode)
Offer customs calibrations solution with USA, NIST, DIN standard pH buffer solution
Inbuilt with an automatic electrode slope display
Allow single point offset calibration (ORP Mode)
Offer adjustable display value for accurate reading
Come with dual measurement unit: mV & Relative mV
Allow 2 to 5 points calibration (with 8 calibration points) (Ion Concentration Mode)
Automatic and direction concentration readout for precise measurement
Available units are: ppm, mg/l, mol/l, mmol/l
Allow 1 or 2 points calibration under air-saturated water and no oxygen solution (DO Mode)
Allow salinity & barometric pressure compensation
Automation calibration holding ranges from 1 to 5 points (Salinity/Resistivity/Conductivity Mode)
Suitable for linear or pure water compensation